The medium-viscosity instant adhesive bonds almost all materials together. The adhesive can be dispensed with pinpoint accuracy and has a fast initial adhesion. Optimum curing is achieved at room temperature with a relative humidity of approx. 65 % under slight contact pressure. With rubber, the bond is hand-tight after about 8-12 seconds, with aluminium after 8-20 seconds. The adhesive reaches its final strength after 24 hours. Due to the transparent curing, the bonded joint is almost invisible. Gaps of up to 0.1 mm are filled and bridged.
- universally applicable
- gap-filling
- transparent
Applicable on: Glass, ceramics, porcelain, metal, wood, leather, cardboard, plastic, rubber.
Danger/safety information: Danger!
H315 - Causes skin irritation.
H319 - Causes severe eye irritation.
H335 - May cause respiratory irritation.
P101 - If medical advice is needed, have container or label at hand.
P102 - Keep out of the reach of children.
P261 - Avoid inhalation of vapour.
P271 - Use only outdoors or in a well-ventilated area.
P280 - Wear protective gloves/eye protection/face protection.
P305+P338+P351 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue to rinse.
P312 - If you feel unwell, call a POISON CENTRE/doctor.
P313+P337 - If eye irritation persists: Get medical advice/attention.
P405 - Keep locked up.
P501 - Dispose of contents/container in accordance with local/national regulations.
Special labelling:
EUH202 Cyanoacrylate. Danger. Adheres to skin and eyelids within seconds. Keep out of the reach of children.
